چگونه يك چرخ دنده در ساليد وركز ايجاد كنيم SolidWorks-

Start SolidWorks and go to Tools > Add-Ins. Make sure Toolbox/Toolbox browser is checked. If not

then check them to add.

2. Click on the right side on Design Library and Select Toolbox. Next select Ansi Metric > Power Transmission > Gears. In side pane, you will see gears, racks, etc. RMB on Spur gear and select “Create Part”.

۳. Set any properties of Spur Gear as desired. Click OK and then save your part.

4. Now click on “Make assembly from part/assembly” icon or File > Make assembly from part/assembly to start a new assembly.

5. Drop the gear anywhere in the assembly. It will get fixed by default.

6. RMB on the part in the feature manager and select Float from the pop up window. This will remove the fix constraint from the part and make it free to move/rotate.

7. Now show the temporary axis by View > Temporary Axis. You can also use part axis if there is any to proceed.

8. After you have made the temporary axis on, the view will be like this.

9. Select the center axis as shown of the gear.

10. Select the appropriate plane (Front plane is this case) and click on Mate if it doesn’t pop up (as in pic) from the assembly toolbar.

11. Set a coincident mate between the selected plane (Front) and axis.

12. Select the same axis and another plane (Top plane in this case) and add another coincident mate.

13. Select the front face or back face of the gear and the left over plane (Right plane in this case) and set another coincident mate.

14. Now the part is constrained in such a way that it can rotate free around its axis. Check it by dragging the gear. You will see the rotary movement only.

15. Select the gear in the workspace or feature manager and drag it while keeping the Ctrl button pressed. This will create a copy of the gear.

16. Mate the front faces of both the gear by adding a coincident mate between them.

17. Select the center axis of second/copied gear and appropriate plane (Top plane in this case) and add a coincident mate.

18. Select the center axis of second/copied gear again and either a plane or center axis of first gear (I have selected Front plane) and add distance mate. I have given 10mm. You can set the position by flipping the direction.

19. Now the second/copied gear is also free to rotate around its axis. Check this one also by dragging.

20. Set both the gear in an appropriate position as shown.

21. Click on Mate; go to mechanical mate and select gear mate.

22. Select the center axis or any other faces. I have selected the bore faces. Set the ratio to 1:1 as they are same gear and finally click OK. You can try with different sizes of gears.

چگونه يك چرخ دنده در ساليد وركز ايجاد كنيم SolidWorks-

مطالب مشابه :

چگونه يك چرخ دنده در ساليد وركز ايجاد كنيم SolidWorks-

دانلود مجموعه آموزشی کم یاب و تخصصی سالید ورک از کمپانی DS SolidWorks Corporation – SolidWorks World

بزرگترین آرشیو نقشه های آماده در محیط CATIA - solidworks

SolidWorks 2007 Bible - راهنمای جامع سالید ورک SolidWork

تور آموزشی تصویری سالیدورک 2009-2010 ویرایش شخصی 106 درس بیش از 11 ساعت تدریس

قالب تزریق پلاستیک طراحی شده در محیط سالید ورکس

لیست فایل های PDF

آرشیو نقشه های انجام شده در نرم افزار catia & solidworks

دانلود کتاب PDF روباتیک و مکاترونیک ( روبات مسیریاب)